top of page

Compliance to Regulations

CTS Electrics 2 Pty Ltd undertakes wiring work to a high standard and complies with several New South Wales Legislative Acts and Regulations as part of the NSW electrical contracting licence requirements including various electrical wiring standards.

Our work comprehensively follows the following Australian Standards:

> AS/NZS 3000:2018 Electrical Installations 'Wiring Rules'

> AS/NZS 2293.1:2018 Emergency lighting and exit signs for buildings Part 1: System design installation and operation.

> AS/NZS 2293.2:2019 Emergency lighting and exit signs for buildings - Routine service and maintenance.

> AS/NZS 3008.1:2017 Electrical installations - Selection of cables.

> AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies.

> AS/NZS 3003:2018 Electrical installations - Patient areas.

> AS/NZS 3010:2017 Electrical installations - Generating sets.

> AS/NZS 3012:2019 Electrical installations - Construction and demolition sites.

> AS/NZS 3017:2007 Electrical installations - Verification guidelines.

> AS/NZS 3019:2007 Electrical installations - periodic verification.

> AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment.

> NSW Service and Installation Rules 2019

The following Acts that we adhere under NSW regulations are:

> NSW Government Code of Practice - Managing electrical risks in the workplace.

> NSW Work Health and Safety Act 2011.

> NSW Work Health and Safety Regulation 2017.

> NSW Home Building Regulation 2014.

> Gas and Electricity (Consumer Safety) Act 2017

Compliance: About
bottom of page